Mentec World. Co., Ltd. is the company where maintenance engineers are gathered with a history in which we have supported the production line for over 40 years with the "maintenance-free spirit (reduction of maintenance cost)" as a primary corporate company of the major automakers in Hiroshima and Kyusyu. With a pioneer spirit and engineer spirit, we have developed the "overall efficiency" business in plant to deal with various kinds of situations such as cost, quality, safety and health based on "TPM (Total Productive Maintenance)" for 21 century.We have actively taken part in the "environmental business" by making use of the experiences obtained from the actual results of maintenance. One of the activities is to produce the "Dust buster" and "Mist net" which inhibit dust with "bubbles" or "mist" to improve the working environment of the stone pit, intermediate treatment facility, iron work, demolition yard, or other sites. Producing and selling them were started 12 years ago, and now approximately 200 units are working in the world to improve the poor working environment because of dust in various kinds of markets. Also, our "Spiral duct" featuring low cost, size free, light weight, and high rigidity by winding the sheet metal coil in continuous spiral and connecting with caulking has been used in the various kinds of fields such as air conditioning/ventilation equipment for 40 years since the production was started.

We are engaged in designing/manufacturing of press mold, various processing, prototype of round bar, small lot production, manufacturing of jig and repair.The average age of the work site is in their early 40's, which is bringing vitality to the company.

Established in 1865. The production and sales results in Golden Buddhist altar have been the best in Japan for 43 years in a row. Distribution to about 1000 stores accounts for 80%, and we have the network of 10 direct shops. We are strongly motivated by new products and designs.

We provide customer satisfaction with the quality products by strict quality control and short-time delivery. We manufacture and process our products, taking the same stance as customers.

We are one of the top manufactures of FURIKAKE (traditional Japanese seasoning) and also known for our retort pouch food and mixed rice seasoning.Our motto is “Selling high quality products the right way” which has been the philosophy or making sure we purchase high standard raw materials to ensure the best quality for our customers/consumers.Our facilities in HIROSHIMA prefecture (where we started) has been well known for our high quality products, and production of dry goods as well as RED SHISO farming for “YUKARI” ®,and with the expansion of our sales, we currently have an additional factory in KOCHI prefecture for the “SUJIAONORI” (seaweed/green laver) cultivation to create efficient quality control as well as production.These two facilities are the key to providing our customers with high quality products and ensuring we provide our motto to each and every customer.

We help you give shape to your idea / design.By manually fine-tuning what we have compromised so far when machining, we can make a product closer to your image.Making use of our experience and technical know-how accumulated over many years since its founding,we meet the needs of product development etc. with skilled professionals in shaping.Prototype model, original product, aero parts order product etc.You can also choose materials suc as wood, plastic, FRP, curing urethane and rubber. Please do not hesitate to consult us.

We are engaged in integrated production of machine tools, including design, manufacturing, and assembly.We are also capable of producing OEM products, and are particularly skilled at high-precision processing. We supply our own materials for can-making, annealing, machining, grinding and finishing to produce various parts and unit kits as finished products that we deliver to our customers. We have also established a new factory exclusively for mass production to meet your needs.

The countermeasures of product loss exert a significant impact on corporate earnings. We help you from the equipment Introduction to operation, consulting as a security solution provider.

With eighty or more years in the hana-katsuo (dried bonito shavings) business in Hiroshima, we are the oldest store of this kind in Hiroshima. Traditional craftsmanship and skill, coupled with the latest machinery, provides our customers with the finest quality products. Currently, our focus is on products for business use.

We manufacture and sell pine furniture, natural furniture, lighting, interior goods, interior building materials with natural taste. We provide custom-made furniture and custom-made kitchens through an integrated system from proposals to design and manufacture. We hold woodworking classes using kit furniture that you can enjoy the pleasure of making. Especially, the study desk that parents and children make together is popular.

[1] Design: related to electricity and sheet metal processing for high-voltage distribution panels. [2] NC program: 2D/3D transmission system. [3] Sheet metal processing: based on long years' experiences and using NC machines, we are able to satisfy customers' requests in precision sheet metal processing, stainless-steel and aluminum processing, and particularly sheet metal processing for cubicles. [4] Painting: melamine powder coating is performed in two booths, with a large size drying furnace and a hanging-type drying furnace. [5] Assembly: wiring assembly of cubicles and distributors. As above, we have established a seamless system from designing/planning to delivery/inspection, in which our expert inspectors will ensure both quality and delivery dates. We acquired the ISO standard in April, 2010.

Our company has 15 hears of experience in our primary field: the installation, inspection, and instruction of the automated warehouses and NC machining equipment that are produced by Seibu Electric and Machinery Co., Ltd. We are also involved in the metal machining field, primarily wire cutting and electrical discharge machining. Under our motto of speed and courtesy, we continue to perfect our technical strengths in order to meet demands for high precision.

Moriyama Giken is engaged in all stages of production, from design to manufacture, of the machines, conveyer belts, maintenance services, and components that are used in the production lines at food product manufacturers, semiconductor manufacturers, component manufacturers, and other customers. We possess our own original development capability, enabling us to respond immediately to customer requests, and to deliver order-made products.

We specialize in fine engraving on materials such as metal, stone, wood, ivory, and amber.

We process and assemble mid/small-sized angular shaped parts and various cases. We offer high quality products within the terms and costs our customers request. Also we provide a service of polishing and adjusting the spindle. We polish and adjust the internal taper holes of the spindle (BT50, BT40) such as NC milling cutters, machining centers in a short time and at low cost. We offer this service on site across Japan, and since April 2009 even in Thailand. Please contact us for a quotation if you have some trouble in your machine tools such as vibrations, inaccurate processing, or damage caused by hitting the spindle.

Nabeya Seisakusho produces various products from wood, material which is particularly familiar to us. Specializing in custom and separate orders, we can satisfy all your demands. Eliminating anything that is unnecessary, we will deliver rationalized and highly functional products straight from our plant. We are working for material procurement, product processing, and delivery that incorporate environmental concerns, and are striving to be a company which can contribute to society.

Our company specializes in metal(mainly steel parts) heat treatment in all fields from “bulk thermal refine” to “surface treatment”. Our main customers include Mazda which is headquartered in Hiroshima, primary automobile parts manufacturers, and large-size construction machine manufacturers, and we appreciate their continued support. Since the foundation, we have been advancing along with the development of the automobile industry. We have received ISO9001 certification for all of our plants. While placing safety and environment above anything else and maintaining a good balance between technology, sales, and management, we will continue our effort to provide QCD (quality, cost, delivery) that satisfies customers and try to achieve a higher degree of strength and precision in our heat treatment components.

With a rich lineup of concrete secondary products, we have established a solid reputation in a short period time. We can meet short deadlines for order-made concrete secondary products that meet customers’ needs.

We believe that in the world of industry, even if there are things which are not needed, there is no such thing as waste. An item which is not needed by a company can, with work, be turned into something useful for a different purpose. Our company seeks to be of help to corporations which are working to reduce the amounts of waste materials. For this purpose we will utilize the expertise and technologies that we have developed since our founding in order to identify unneeded items that can be turned into useful materials. At present, while environmental protection and recycling are expected from all companies, our company is not satisfied with just this. We are working to improve our environmental performance, correctly evaluate the value of items, and return this value to our customers.

With fidelity as our guiding precept for 90 years since the founding, our company has worked to promote prosperity in our local society and to assist our customers in their development. In recent years, amid the tide of digitalization, we have been thinking about how to combine our strengths and changes and have put the resultant ideas into practice. One of such actions is personnel training. In the printing division which is a pillar of our business, five employees acquired the certificate of the first grade certified skilled worker (printing) (as of December 2009). In the digital division, two employees acquired the certificate of “cross media expert” who are allowed to make proposals not only on paper but also on diverse media including the Internet, mobile phones, digital signage, TV, radio (as of December 2009). In the creative division, too, the quality of the personnel has been edging up as much as to win the Hiroshima Advertisement and Planning Award many times. To be chosen by clients, we utilize a variety of human resources to provide one-stop service: in addition to planning, design, printing, we cover cross media presentation and production, small-lot printing by POD, package deals and their delivery.