We have a long tradition and much experience in the tent industry. Our extensive experience ranges from large outdoor tents to awnings for private homes. We focus our efforts on solutions using tents that help achieve energy conservation, power saving, and UV protection.

Do you suffer from damage caused by wild boar, deer, or monkeys? Our products can handle the increasing damage done by these destructive animals, and can catch many at one time. We manufacture and sell a variety of capture cages and capture devices, for which our company holds the utility model patents.

Nishi Hiroshima Times has been published weekly for 33 years. It was shifted to the web version of "Nishi Hiroshima Times Wakuwaku+" in 2021 and we continue to share information with the local community. ・Original character "Eruko—chan"    LINE stamp Now Available ! We are on Instagram ! ・We hold Miyajima Wakuwaku walking and other events.

LABOTEC is primarily engaged in the measurement certification business and in the development of automatic analysis devices. 1)Measurement certification business: From the perspective of public health and pollution prevention, we measure the air, water and soil quality, the noise and vibration levels, we analyze waste materials and drinking water, according to national requirements prescribed by Japanese government and national agencies, or by local governments. We also offer a wide range of analyses, including plant analyses for the determination of operating conditions of chemical plants or other products quality-related analyses. 2)Automatic analysis devices: In our Automated Analyses Devices Development Division, we identify various needs for measurement certification from offices and plants across Japan, and use our company's expertise and experience to develop original and specific devices, which are not available from any other company, from inside or outside Japan. We carry out in our company all stages of the developmental process, from conception, design, production, testing and finally sale.

Emphasizing both good taste and good health, we have constructed an integrated system for development, production, and sales of nori seaweed products. By expanding direct sales to the consumers (mail-order sales) under our Nori-sho Akinosato brand, we are strengthening our base as an independent and growing business.

Oysters and conger eels are caught in the bountiful Seto Inland Sea of Hiroshima.The characteristics of Hiroshima oysters are thier big and longish shell, meaty, clear black gill, and rich sweetness.Even among Hirishima oysters, "Jigozen oysters" are evaluated as oysters with more meaty and riche sweetness.In addition, it is known that they hardly become smaller when they are heated. you can enjoy large oysters.In Hiroshima, conger eels have been popular since old times.The reason is that clear streams containing nutrition of the lush fertile land in Hiroshima, the city of water, flow into the Seto Inland Sea, where is a great environment for conger eels to grow well as there are small fish under oyster rafts.They have been conveniently used as the ingredient for sushi and futomaki for formal occasions because conger eels here grow fast, and have the best taste with soft skin and meat. They are always in stores here, which has become a unique tradition of Hiroshima.

Better taste and healthier life through food processing. Specialize in producing various items in small-lots, from the product development stage through to marketing.

To cope with a rapid progress and innovation of mold materials, we have introduced a wide range offacilities such as machining centers, electric discharge machines, wire cutters, NC milling cutters,lathes and others. We also put emphasis on educating and training our engineers so thatthey can fully utilize the facilities. By constantly encouraging to upgrade and pass down skillsand putting them into practice, we try to maintain and improve quality. Furthermore, toreflect customers' voice in our customer satisfaction activities, we continue to improve andstrengthen each function of sales, design, production, and support. Our No.1 priority is to provideproducts and services that guarantee further satisfaction to customers, and we try hard everydaytoward that goal.

We always aim for product construction, planning, and all other aspects of creation which exactly match the customers’ needs. Our quality has gained us such great trust among our customers that they know, as long as they leave it to Masunari, everything will be fine. Please give us a try.

Our technology is a key to expand our business. We always aim to produce products by which customer satisfaction is achieved. We can accommodate various kinds of requests such as multi-item or small-lot production: cutting 1 plate, bending 1 product, large signatures, and ornaments.

Makes it a rule to manufacture all the production machines and equipment, such as dies, in-house. With a philosophy to develop and supply customers with products which represent fresh feelings and comfort, endeavors to do so by reducing cost and by catering to the detailed needs of customers.

Since our founding, our business has been to be a contributing part of our customers’ success. As a small company, we can put this philosophy to use with quick responses, high-quality proposals, and delivery of highly satisfactory results. With introducing the Silver DigiPlater in 2002 and the color printing press in 2004, we can eliminate intermediate steps and deliver printed materials faster and at lower prices.In addition, we are focused on developing original products which are available from our company only. In particular, our victory fans and victory calendars that are essential as election campaign goods are popular throughout Japan.

Mentec World. Co., Ltd. is the company where maintenance engineers are gathered with a history in which we have supported the production line for over 40 years with the "maintenance-free spirit (reduction of maintenance cost)" as a primary corporate company of the major automakers in Hiroshima and Kyusyu. With a pioneer spirit and engineer spirit, we have developed the "overall efficiency" business in plant to deal with various kinds of situations such as cost, quality, safety and health based on "TPM (Total Productive Maintenance)" for 21 century.We have actively taken part in the "environmental business" by making use of the experiences obtained from the actual results of maintenance. One of the activities is to produce the "Dust buster" and "Mist net" which inhibit dust with "bubbles" or "mist" to improve the working environment of the stone pit, intermediate treatment facility, iron work, demolition yard, or other sites. Producing and selling them were started 12 years ago, and now approximately 200 units are working in the world to improve the poor working environment because of dust in various kinds of markets. Also, our "Spiral duct" featuring low cost, size free, light weight, and high rigidity by winding the sheet metal coil in continuous spiral and connecting with caulking has been used in the various kinds of fields such as air conditioning/ventilation equipment for 40 years since the production was started.

We are one of the top manufactures of FURIKAKE (traditional Japanese seasoning) and also known for our retort pouch food and mixed rice seasoning.Our motto is “Selling high quality products the right way” which has been the philosophy or making sure we purchase high standard raw materials to ensure the best quality for our customers/consumers.Our facilities in HIROSHIMA prefecture (where we started) has been well known for our high quality products, and production of dry goods as well as RED SHISO farming for “YUKARI” ®,and with the expansion of our sales, we currently have an additional factory in KOCHI prefecture for the “SUJIAONORI” (seaweed/green laver) cultivation to create efficient quality control as well as production.These two facilities are the key to providing our customers with high quality products and ensuring we provide our motto to each and every customer.

We help you give shape to your idea / design.By manually fine-tuning what we have compromised so far when machining, we can make a product closer to your image.Making use of our experience and technical know-how accumulated over many years since its founding,we meet the needs of product development etc. with skilled professionals in shaping.Prototype model, original product, aero parts order product etc.You can also choose materials suc as wood, plastic, FRP, curing urethane and rubber. Please do not hesitate to consult us.

[1] Design: related to electricity and sheet metal processing for high-voltage distribution panels. [2] NC program: 2D/3D transmission system. [3] Sheet metal processing: based on long years' experiences and using NC machines, we are able to satisfy customers' requests in precision sheet metal processing, stainless-steel and aluminum processing, and particularly sheet metal processing for cubicles. [4] Painting: melamine powder coating is performed in two booths, with a large size drying furnace and a hanging-type drying furnace. [5] Assembly: wiring assembly of cubicles and distributors. As above, we have established a seamless system from designing/planning to delivery/inspection, in which our expert inspectors will ensure both quality and delivery dates. We acquired the ISO standard in April, 2010.

Our company has 15 hears of experience in our primary field: the installation, inspection, and instruction of the automated warehouses and NC machining equipment that are produced by Seibu Electric and Machinery Co., Ltd. We are also involved in the metal machining field, primarily wire cutting and electrical discharge machining. Under our motto of speed and courtesy, we continue to perfect our technical strengths in order to meet demands for high precision.

Moriyama Giken is engaged in all stages of production, from design to manufacture, of the machines, conveyer belts, maintenance services, and components that are used in the production lines at food product manufacturers, semiconductor manufacturers, component manufacturers, and other customers. We possess our own original development capability, enabling us to respond immediately to customer requests, and to deliver order-made products.

We specialize in fine engraving on materials such as metal, stone, wood, ivory, and amber.

We process and assemble mid/small-sized angular shaped parts and various cases. We offer high quality products within the terms and costs our customers request. Also we provide a service of polishing and adjusting the spindle. We polish and adjust the internal taper holes of the spindle (BT50, BT40) such as NC milling cutters, machining centers in a short time and at low cost. We offer this service on site across Japan, and since April 2009 even in Thailand. Please contact us for a quotation if you have some trouble in your machine tools such as vibrations, inaccurate processing, or damage caused by hitting the spindle.